Author name: Brandi Pool

Today, we’re introducing you to our automated Vaisala Ultrasonic Weather Station, which provides weather data such as temperature, humidity, pressure, wind speed, direction, and rainfall. There are no moving parts, and it’s very easy to service with the Vaisala on top. We have it connected to our WASP Datalogger that sends data automatically to our […]

Today we’re demonstrating how to replace a PM module in the Aeroqual Dust Sentry or AQS 1 Monitors.   Removing the Module Once you identify the module to be removed, you’ll need to raise the inlet out of the module. To do so, take off the cyclone and TSP heads. Just unscrew the top and

  Today we’re demonstrating how to calibrate your BSWA Sound Level Meter with your Aeroqual Dust Sentry and a CAL200 half-inch calibrator. You can use any half-inch standard microphone field calibrator. The first thing that you want to do is remove the windscreen from the microphone assembly. Look for the upper seam in the windscreen

Today we’re demonstrating how to assemble a 24 Volt lithium iron phosphate battery solar kit with the Delta Link and a simulated solar panel on a benchtop power supply. Installing the Batteries The first thing we’re going to do is take our power extension cables out so we can install our batteries. Take the two

Today, we’re going do a quick overview of the slope monitoring system using load sensing nodes. Equipment (from top to bottom) Vaisala all-in-one weather station – this measures precipitation, temperature, humidity, barometric pressure, wind speed, and direction. Solar panel – this is used to power the weather station. On/Off Switch – behind the solar panel