Service and Calibration Kit for the Aeroqual Dust Sentry: Unboxing

Service and Calibration Kit for the Aeroqual Dust Sentry: Unboxing

Unboxing Our Calibration & Service Kit for the Aeroqual Dust Sentry

Today I’m going to be unboxing our calibration and service kit for the Aeroqual Dust Sentry. So let’s have a look inside. We will start with some spares. So we have some spare O-rings for the inlet, some spare keys, some spare screws for the inlet, and some spare luer fittings.

Tools wise, we have a long screwdriver for taking modules out. Filters, we have filter pairs

for the particulate monitoring. The amount of filters that you have will be depending on how many you purchased, and I’ll just top up the service kit. We’ve got a zero air filter here. This is a vacuum gauge for testing leaks. And finally, this is a rotameter for testing the flow rate of the monitor.

And at the end here, you have an easy push connect to make measuring the flow simple. Okay, so that’s our servicing calibration kit for the Aeroqual Dust Sentry.