April 27, 2021

How to Calibrate a VOC Module?

Hey guys, Mick from Specto Technology here. Today, I’m going to show you how to calibrate a VOC module in the Aeroqual AQS1 monitor. So, what we’re going to do is take you through how to connect the gas cylinders up to the monitor, and then take you through the software and how you actually update the calibration curve on Aeroqual Cloud. Service Kit So, the first thing we’re going to do is just show you the hardware that we’re using here. So, this is in your service kit. This is a flow regulator at 0.1 liters per minute, a hundred milliliters per minute. Then you have some tubing. This is Teflon tubing. It doesn’t absorb any contaminants. So, it’s clean…

How to Calibrate a BSWA Inside an Aeroqual Monitor?

Today, we’re going to have a look at how to calibrate your BSWA sound level meter integrated in your Aeroqual unit. 1. First, lift up your unit and then press the pause button. You should see the pause icon in the corner. 2. Once you’re on pause, press menu, navigate down to calibration, and hit enter. (We’re doing this upside down because that’s the way that the cable comes out of the box.) 3. Hit play/pause to start the calibration. Next, we’ll get our microphone ready. We will need our sound level calibrator for this. Our microphone is mounted on the tripod….