How to Assemble a Pole Mount Bracket for a Fiberglass Enclosure?

How to Assemble a Pole Mount Bracket for a Fiberglass Enclosure?

Pole Mount Bracket – Fiberglass Enclosure

Today, we are going to show you how to put together the pole mount bracket for our fiberglass enclosure. We’ve got all the hardware laid out here.

Pan Head Screws

Take the pan head screws, drop them through the outside most holes, and you want to leave the slots and U-bolt holes on the bottom so they are accessible once you actually want to put this on the bracket. Then you’re just going to tighten those up. And you want to use these nuts for attaching the bracket to the enclosure. And same thing on the top.

U-Bolts

Now it is good to put the U-bolts on before you actually slide onto the post. You go through the two holes on the bottom, throw a lock washer on there, put on your nut, and then just thread those on loose. This way you can just slide the whole box and U-bolts over the pole and we’ll do the same thing on the top.