Request Quote

  • This field is for validation purposes and should be left unchanged.

Aeroqual Ozone (O3) Sensor Head, 0-10 ppm (High)

Fan-sampling gas sensitive semiconductor (GSS) sensor: 0-10 ppm Ozone


Available on backorder

Product Details

Aeroqual Ozone (O3) Sensor Head, 0-10 ppm (High) from Specto Technology

Specto Technology is proud to offer the Ozone Sensor 0-10 ppm. 


  • Designed to provide accurate, consistent readings of the ozone in your ambient airspace
  • Range: 0-10 ppm
  • Sensor Type:  GSE
  • Minimum Detection Limit: 0.01ppm
  • Accuracy of Factory Calibration: <±0.01 ppm + 7.5%
  • Resolution: 0.01ppm
  • Response Time: 60 Seconds
  • Temp: 0 to 40°C
  • Relative Humidity: 15 to 90%


  • Has a response time of 60 seconds allows this to be a good head to find high ozone levels, and measure ozone levels in spaces where testing may be occurring
  • This sensor uses an active sensor technology with an internal fan to pull air across the GSE sensor at a specific flow rate for accurate gas detection


  • Designed to measure Ozone gas from 0-10 ppm with a 0.01 ppm resolution
  • Will directly fit onto any Aeroqual Series-500 Ozone monitor


  • The Aeroqual Sensors are housed within an interchangeable ‘sensor head’ that attaches to the Aeroqual S500 Portable Air Quality Monitor base.
  • You can choose from up to 30 different sensor heads. Each sensor contains a single gas or particle sensor. Swapping sensor heads takes seconds and no configuration or re-calibration is required.


  • Aeroqual uses a mix of sensor technologies; you can select the correct one to meet your needs depending on the target pollutant and application.